Home
English
Japanese
 
 
 
● Experiments the radiator & heater core of the wide selection
● The various safety device is embodied
● Controls all functions from software
● Guarantees the test which is stabilized
● Supports a calibration Mode (S/W)
● Also the order production for the customer is possible
 
- Feature -
 
Test room - Chamber
Cooling water cooling
system - Ref. System, Cold
tank
Cooling water heating
system - Heater & Hot tank
Cooling water supply
system - Pump, Valve &
Pipe line
Indicator - Controller,
Counter, Timer & Indicator
Instrumentation - Sensor &
Converter
DAS - Field Point & Labview
S/W
- Specifications -
 
MODEL
SEOUL-RHP-1000Series
System
Air compressor, Heat exchanger, Pipe line system
Compressed Air
6kgf/cm2
Safety Device
Heater E.O.C.R, SCR over current, Pressure H.P S/W
High temperature : High Limit cut off
Inlet Pressure
0.5 ~ 1.5 kg/cm2
Temperature
Hot temperature 80 ~ 100 (±3) degree
Cold temperature -10 ~ 0 (±3) degree
Coolant Flow
Rate
20~ 100LPM
Ambient Temperature
25 (± 5) degree
Test Cycle
1Cycle/Minutes 20SEC. Dewell@ Hot & Cold Temp.
Refrigerator
Comp.30HP * 2EA (GAS R-22) / Water cold condending system
Test Cell
1400(W) * 8000(H) * 1000(D)
Water proofing
Pressure Transducer
0 ~ 5 kg/cm2 (±)0.75% FS
Temperature Sensor
-50 ~ 150 degree, TC T-type, Diameter:1/8" STS sheath
Construction
Material
Rolled Acrylic & Stainless & Aluminum
Sizing
 
Control
Control
Manual / Full Automatic
Control Interface
LabVIEW SoftWare With PC Interface