Home
English
Japanese
 
 
 
● Experiments inter cooler(Pressure Cycle) of the wide selection
● The various safety device is embodied
● Controls all functions from software
● Guarantees the test which is stabilized
● Supports a calibration mode (S/W)
● Also the order production for the customer is possible
 
- Feature -
 
Test room - Chamber
Charged air pressurized
system - Air compressor &
Pipe line
Charged air temperature
control system - Heater &
Cooler
Instrumentation - Sensor &
Converter
Indicator - Controller,
Counter, Timer & Indicator
DAS - Field Point & Labview
S/W
- Specifications -
 
MODEL
SEOUL-RHP-1000Series
System
Air compressor, Heat exchanger, Pipe line system
Compressed Air
5kgf/cm2
Safety device
Heater E.O.C.R, SCR Over Current, Pressure H.P S/W
High temperature : High limit cut off
Pressure Range
0 ~ 206 kPa(0 ~2.1kg/cm2)
Air Temperature
160 (± 5) degree
Pressure Frequency
90 Cycle/min, Sinusoidal wave
Ambient Temperature
25 (± 5) degree
Total Test
Cycle
1,000,000 Cycles
Refrigerator
Capacity : 10HP, Type: Hermetic Refrigerant: R22
Test Room
2.6m(W) * 1.7m(H) * 1.0m(L)
Insulation : Poly urethane 100t
Gas Mass
Flow Meter
Flow Rate : 1088kg/hr(high), 81.6kg/hr(Low) Max: 41.3bar
Coolant Mass
Flow meter
Flow Rate : 0 ~250L/min Max: 42.3bar
Construction
Material
Rolled Acrylic & Stainless & Aluminum
Sizing
 
Control
Control
Manual / Full Automatic
Control Interface
Directreading / LabVIEW SoftWare With PC Interface